| Author |
Message |
selva
Guest
|
 Posted:
Tue Dec 20, 2005 9:30 am Post subject:
error:0x80070057 |
|
|
hi,
I am getting the followoing error while doing live broadcast
"The following error occured while setting up the source "source 1""
The parameter is incorrect.
(0x80070057)
pl kindly tell me the troubleshooting steps to above method.
thank u.
expecting ur valuable replies.
with regds,
selva
|
|
| Back to top |
|
 |
Neil Smith [MVP Digital M
Guest
|
| Posted:
Tue Dec 20, 2005 5:30 pm Post subject:
Re: error:0x80070057 |
|
|
On Mon, 19 Dec 2005 22:38:02 -0800, "selva"
<selva@discussions.microsoft.com> wrote:
| Quote: | hi,
I am getting the followoing error while doing live broadcast
"The following error occured while setting up the source "source 1""
The parameter is incorrect.
(0x80070057)
pl kindly tell me the troubleshooting steps to above method.
|
1) Determine the type of source which "Source 1" is, and post it here.
2) Determine if "Source 1" (should it be a hardware device) is
installed and working correctly.
etc etc
Let's try (1) and (2) first.
Cheers - Neil |
|
| Back to top |
|
|
selva
Guest
|
| Posted:
Wed Dec 21, 2005 9:30 am Post subject:
RE: error:0x80070057 |
|
|
thank u for ur reply sir,
i have installed "TV tuner card" and "windows media services,windows media
encoder" in seperate machine. TV tuner card is in Windows xp machine and
encoder, WMS is in windows 2000 server.
wheather i have to install tv tuner card and WMS, encoder in a same machine?
Thank u,
with regds,
selva
"selva" wrote:
| Quote: | hi,
I am getting the followoing error while doing live broadcast
"The following error occured while setting up the source "source 1""
The parameter is incorrect.
(0x80070057)
pl kindly tell me the troubleshooting steps to above method.
thank u.
expecting ur valuable replies.
with regds,
selva
|
|
|
| Back to top |
|
|
Neil Smith [MVP Digital M
Guest
|
| Posted:
Wed Dec 21, 2005 1:30 pm Post subject:
Re: error:0x80070057 |
|
|
On Tue, 20 Dec 2005 21:30:02 -0800, "selva"
<selva@discussions.microsoft.com> wrote:
| Quote: | I am getting the followoing error while doing live broadcast
"The following error occured while setting up the source "source 1""
The parameter is incorrect.
(0x80070057)
i have installed "TV tuner card" and "windows media services,windows media
encoder" in seperate machine. TV tuner card is in Windows xp machine and
encoder, WMS is in windows 2000 server.
|
OK well a lot of TV cards are problematic to use in WM Encoder.
Can you assure me that you have the newst drivers for the TV card, and
that it works correctly with the manufacturers supplied TV viewing
program ?
A good check is to run DScaler to ensure the card hardware is
installed properly and works : http://deinterlace.sourceforge.net/
Next check your profile have selected the correct source (Cable or
Antenna) for the TV card, and you have a channel number set up.
Also go to the Processing tab of the encoder. There you can see Pixel
Format, probably set to Default. Try and see if it works when set to
IYUV or YUY2 (I think), your TV card may be sending an unexpected
pixel format to the encoder.
| Quote: | wheather i have to install tv tuner card and WMS, encoder in a same machine?
|
No, the encoder and TV card must be in the same machine, the WMS does
not need to be on that machine (though it can be if you only have a
single PC).
It's usually better for performance reasons, to have the WMS on a
machine which is only for streaming, not for encoding.
HTH
Cheers - Neil |
|
| Back to top |
|
|
selva
Guest
|
| Posted:
Thu Dec 22, 2005 9:30 am Post subject:
Re: error:0x80070057 |
|
|
hi sir,
thank u very much for u valuable suggestions. in last post u have
asked me abt source1:
1. Source 1 from Devices In properties panel
2. In pixelview tv tuner i m getting video in 'composite' source only i m
not getting anything otherthan dots using either 'cable' or 'antenna' type
input.
andu suggested me to try with IYUV and YUY2 i tried with all those in tht
tab but still i m getting the same error.
thank u sir,
with regds,
selva
"Neil Smith [MVP Digital Media]" wrote:
| Quote: | On Tue, 20 Dec 2005 21:30:02 -0800, "selva"
selva@discussions.microsoft.com> wrote:
I am getting the followoing error while doing live broadcast
"The following error occured while setting up the source "source 1""
The parameter is incorrect.
(0x80070057)
i have installed "TV tuner card" and "windows media services,windows media
encoder" in seperate machine. TV tuner card is in Windows xp machine and
encoder, WMS is in windows 2000 server.
OK well a lot of TV cards are problematic to use in WM Encoder.
Can you assure me that you have the newst drivers for the TV card, and
that it works correctly with the manufacturers supplied TV viewing
program ?
A good check is to run DScaler to ensure the card hardware is
installed properly and works : http://deinterlace.sourceforge.net/
Next check your profile have selected the correct source (Cable or
Antenna) for the TV card, and you have a channel number set up.
Also go to the Processing tab of the encoder. There you can see Pixel
Format, probably set to Default. Try and see if it works when set to
IYUV or YUY2 (I think), your TV card may be sending an unexpected
pixel format to the encoder.
wheather i have to install tv tuner card and WMS, encoder in a same machine?
No, the encoder and TV card must be in the same machine, the WMS does
not need to be on that machine (though it can be if you only have a
single PC).
It's usually better for performance reasons, to have the WMS on a
machine which is only for streaming, not for encoding.
HTH
Cheers - Neil
|
|
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in